Search COMSTAR Administration
{pagetreesearch:rootPage=COMSTAR Administration}
----
h1. COMSTAR Administration
OpenSolaris Common Multiprotocol SCSI TARget, or COMSTAR, is a software framework that enables you to convert any OpenSolaris host into a SCSI target device that can be accessed over a storage network by initiator hosts. Click a topic to view the information.
h2. COMSTAR Basics
* [What's New in COMSTAR?|What's New in COMSTAR?]
* [About COMSTAR]
* [How COMSTAR Works]
* [COMSTAR Related Documents]
* [COMSTAR Prerequisites]
* [How to Download and Install COMSTAR]
h2. Getting Started with COMSTAR
* [Getting Started with COMSTAR (Task Map)]
* [How to Enable the STMF Service]
* [How to Create SCSI Logical Units]
* [How to Make SCSI Logical Units Available]
h2. Setting Up a Storage Array - FC
* [Configuring a Fibre Channel Storage Array With COMSTAR (Task Map)|Configuring a Fibre Channel Storage Array With COMSTAR (Task Map)]
* [How to Configure Fibre Channel Ports]
* [How to Make Logical Units Available for FC and FCoE]
h2. Setting Up a Storage Array - FCoE
* [Configuring an FCoE Storage Array With COMSTAR (Task Map)|Configuring an FCoE Storage Array With COMSTAR (Task Map)]
* [How to Configure FCoE Ports|How to Configure FCoE Ports]
* [How to Make Logical Units Available for FC and FCoE|How to Make Logical Units Available for FC and FCoE]
h2. Setting Up a Storage Array - iSCSI
* [Configuring an iSCSI Storage Array With COMSTAR (Task Map)|Configuring an iSCSI Storage Array With COMSTAR (Task Map)]
* [How to Configure an IB HCA for iSER]
* [How to Configure iSCSI Ports|How to Configure iSCSI Target Ports]
* [How to Configure an iSCSI Target for Discovery|How to Configure an iSCSI Target for Discovery]
* [How to Configure an iSCSI Initiator]
* [How to Create a Target Portal Group]
* [How to Make Logical Units Available for iSCSI and iSER|How to Make Logical Units Available for iSCSI and iSER]
h4. Configuring and Maintaining iSCSI Authentication
* [About iSCSI Authentication|iSCSI Authentication]
* [Configuring iSCSI-Based Authentication (Task Map)]
* [How to Remove Discovered Targets|How to Remove Discovered iSCSI Targets]
* [How to Monitor an iSCSI Configuration|How to Monitor an iSCSI Configuration]
h2. Setting Up a Storage Array - SRP
* [Configuring an SRP Storage Array With COMSTAR (Task Map)]
* [How to Enable the SRP Target Service]
* [How to Configure an SRP Initiator]
h2. Backing Up and Restoring
* [Backing Up and Restoring a COMSTAR Configuration]
{pagetreesearch:rootPage=COMSTAR Administration}
----
h1. COMSTAR Administration
OpenSolaris Common Multiprotocol SCSI TARget, or COMSTAR, is a software framework that enables you to convert any OpenSolaris host into a SCSI target device that can be accessed over a storage network by initiator hosts. Click a topic to view the information.
h2. COMSTAR Basics
* [What's New in COMSTAR?|What's New in COMSTAR?]
* [About COMSTAR]
* [How COMSTAR Works]
* [COMSTAR Related Documents]
* [COMSTAR Prerequisites]
* [How to Download and Install COMSTAR]
h2. Getting Started with COMSTAR
* [Getting Started with COMSTAR (Task Map)]
* [How to Enable the STMF Service]
* [How to Create SCSI Logical Units]
* [How to Make SCSI Logical Units Available]
h2. Setting Up a Storage Array - FC
* [Configuring a Fibre Channel Storage Array With COMSTAR (Task Map)|Configuring a Fibre Channel Storage Array With COMSTAR (Task Map)]
* [How to Configure Fibre Channel Ports]
* [How to Make Logical Units Available for FC and FCoE]
h2. Setting Up a Storage Array - FCoE
* [Configuring an FCoE Storage Array With COMSTAR (Task Map)|Configuring an FCoE Storage Array With COMSTAR (Task Map)]
* [How to Configure FCoE Ports|How to Configure FCoE Ports]
* [How to Make Logical Units Available for FC and FCoE|How to Make Logical Units Available for FC and FCoE]
h2. Setting Up a Storage Array - iSCSI
* [Configuring an iSCSI Storage Array With COMSTAR (Task Map)|Configuring an iSCSI Storage Array With COMSTAR (Task Map)]
* [How to Configure an IB HCA for iSER]
* [How to Configure iSCSI Ports|How to Configure iSCSI Target Ports]
* [How to Configure an iSCSI Target for Discovery|How to Configure an iSCSI Target for Discovery]
* [How to Configure an iSCSI Initiator]
* [How to Create a Target Portal Group]
* [How to Make Logical Units Available for iSCSI and iSER|How to Make Logical Units Available for iSCSI and iSER]
h4. Configuring and Maintaining iSCSI Authentication
* [About iSCSI Authentication|iSCSI Authentication]
* [Configuring iSCSI-Based Authentication (Task Map)]
* [How to Remove Discovered Targets|How to Remove Discovered iSCSI Targets]
* [How to Monitor an iSCSI Configuration|How to Monitor an iSCSI Configuration]
h2. Setting Up a Storage Array - SRP
* [Configuring an SRP Storage Array With COMSTAR (Task Map)]
* [How to Enable the SRP Target Service]
* [How to Configure an SRP Initiator]
h2. Backing Up and Restoring
* [Backing Up and Restoring a COMSTAR Configuration]