|
 Sun xVM Ops Center 1.1 Home Managing and Monitoring |
Monitoring Hardware Health
Hardware Characteristics
Sun xVM Ops Center monitors the hardware health of the managed hosts. Sensors in the hardware of managed hosts are used to monitor temperature, voltage, and fan speed. The following characteristics of a managed server's hardware can be monitored:
- CPU temperature
- Ambient temperature
- Fan speed in revolutions per minute
- Voltages
- LEDs
- Hard disks and memory
Hardware Health States
The hardware health states are displayed as follows:
- Good - The server hardware is working properly.
- Unknown - An error occurred while attempting to retrieve information about hardware health. The server is connected but is not returning hardware health information.
- Unreachable - The server cannot be contacted for information about the status of hardware health. This state is most often caused by a network problem.
- Unmonitored - The server is not being monitored.
- Warning Failure - A potential or impending fault condition has been detected on the server. Action should be taken to prevent the problem from becoming more serious.
- Critical Failure - A fault condition has occurred on the server. Corrective action is required.
- Nonrecoverable Failure - The server has completely failed. Recovery is not possible.
Top
Sign up or Log in to add a comment or watch this page.