080320 Notes

10:30 nwam meeting
by 17:00
        renee needs to leave
        need tasklist stop no later then 4

1 - remember that neither scheme is set in stone
renee drew up ncu config and rule input and we discussed requirements driven
        by it
this along with previous converstation drives us towards priority scheme
        -- discussed way to this in the gui that we can show as example for
                requirement
        choose priority scheme (2)
11 - DME working on some sysevents for HAL, we might need to extend
        need to look into interaction with RCM (tied to yesterday)
15 - store away previous location info when we cold start so it can be restored
        on disable restore legacy info
        race to delete legacy can be ignored or ????
        two things putting config in place and then activate
        as we go down we can't really reload config until after network/physical
                started, so make them all dependent on network/physical
        so can not background until after we've backgrounded
                hard reset ==>  1. create /var/run/nwam/soft_reset
                                2. save legacy location to /var/run
                                3. tear down any links/interface
                                4. activate no-net location
                soft reset ==>  5. activate current NCP
        fsys/usr might not have run yet to mount root r/w
        sol'n - split nwam into nc{up} management and location management
                could really be mode of nwamd
        do location related services depend on net/init rather then net/physical
12 run with least privs, get privs as needed
        note: door users are priv'd correctly
        need to look at worstation role further
        what privs does the gui need so we can modify workstation owner role
9 couple pages of state machine, need to add table
OT: need to solve reference of wireless driver when essid is connected
                        inc on connect or disallow attach when connectioned
        wireless rescan work, trigger on essid list change
        builtin in wireless policy of detaching when signal low doesn't work
                in phase 0, how to replace.
        issues with radio off and still getting list of essids
        essid list doesn't get updated correctly
8,10 need to codify psuedo code
        writeup philosophy, examples, requirements
        wireless link unbroadcasted essid
        how do we deal with non broadcasted lan that is in preference list
        specification of info with NO_MAGIC event