NOTE: ASR 2.1  or later is required for the SPARC64 VI Servers.

NOTES:

1. Using ILOM as a Telemetry Source:

• If your system is running ILOM 1.0.x, it must be upgraded to ILOM 2.0.x or later to capture telemetry on the service processor.

• You must have the ILOM on the Service Processor networked to the SASM ASR plug-in. Please refer to your Server platform documentation for instructions on how to network your Service Processor.

2. Using Solaris 10 FMA as a Telemetry Source:

• Requires Solaris 10u6 or higher.

3. Using ILOM Fault Management as a Telemetry Source for Xxx7x Servers:

• ILOM Fault Management is the primary source of fault telemetry.

• Provides fault telemetry for Solaris, Linux, and Windows servers.

4. X2270 Service Processor is a system option:

• The Service Processor is required in order to generate the ILOM Fault Management fault telemetry. 

5.  Using Solaris 10 FMA as a Telemetry Source for Xxx7x Servers:

• Solaris 10 FMA provides some additional fault coverage, but ILOM Fault Management is the primary source of fault telemetry.

NOTES:

1. Using Solaris 10 FMA as a Telemetry Source:

• Requires Solaris 10u3 or higher.
• If using Solaris 10u3 or 10u4, you must install the following patches:
  Patch IDs 127127-11 or higher kernel patch and associated required patches, 122752-04 or higher (obsoleted by 120011-14), 123839-07 or higher (obsoleted by 126897-02), 125369-10 or higher, and 137095-01 or higher.

2.  Using SunMC Agent as a Telemetry Source:

• Install either SunMC_3.6.1 agent with patch ID 123923-02_ or install SunMC 4.0  and the Sun Management Center 4.0 V5 Add-on software for SPARC Enterprise, Sun Fire, Sun Blade, Sun Ultra, and Netra systems. Refer to the SunMC Documentation Center for more information.

NOTES:

1. Using Solaris 10 FMA as a Telemetry Source:

• Requires Solaris 10u3 or higher.
• If using Solaris 10u3 or 10u4, you must install the following patches:
  Patch IDs 127127-11 or higher kernel patch and associated required patches, 122752-04 or higher (obsoleted by 120011-14), 123839-07 or higher (obsoleted by 126897-02), 125369-10 or higher, and 137095-01 or higher.

2.  Using SunMC Agent as a Telemetry Source:

• Install either SunMC 3.6.1 agent with patch ID 123923-02 or install SunMC 4.0 and the Sun Management Center 4.0 V5 Add-on software for SPARC Enterprise, Sun Fire, Sun Blade, Sun Ultra, and Netra systems. Refer to the SunMC Documentation Center for more information.     .

NOTES:

1.  Using SunMC Agent as a Telemetry Source:

• Install either SunMC 3.6.1 agent with patch ID 123923-02 or install SunMC 4.0  and the Sun Management Center 4.0 V5 Add-on software for SPARC Enterprise, Sun Fire, Sun Blade, Sun Ultra, and Netra systems. Refer to the SunMC Documentation Center for more information.
• On System Controllers using SMS 1.6 only: Either Solaris 9, s9s_u5wos_08b is required or  Solaris 10, s10s_u3wos_10   is required.
• FMA is used for Solaris 10 Domains only. On System Controllers running Solaris 10, you do not need to configure FMA for ASR.

2. Using Solaris 10 FMA as a Telemetry Source:

• Requires Solaris 10u3 or higher.
• If using Solaris 10u3 or 10u4, you must install the following patches:
  Patch IDs 127127-11 or higher kernel patch and associated required patches, 122752-04 or higher (obsoleted by 120011-14), 123839-07 or higher (obsoleted by 126897-02), 125369-10 or higher, and 137095-01 or higher.
• ASR will provide best fault coverage with Solaris 10 and FMA configured on domains. ASR platform monitoring from the System Controllers will function without FMA configured on Solaris 10 domains, and with domains running Solaris 8 or 9.

NOTES:

1. Using ILOM as a Telemetry Source:

• ASR supports ILOM 3.0 on applicable systems.

2. Using Solaris 10 FMA as a Telemetry Source:

• Requires Solaris 10u3 or higher.
• If using Solaris 10u3 or 10u4, you must install the following patches:
  Patch IDs 127127-11 or higher kernel patch and associated required patches, 122752-04 or higher (obsoleted by 120011-14), 123839-07 or higher (obsoleted by 126897-02), 125369-10 or higher, and 137095-01 or higher.

3. Use either ILOM or SunMC Agent as a Telemetry Source (not both):

• You should not configure both ILOM and SunMC as a telemetry source; you must choose one or the other. Sun recommends that you select ILOM as your telemetry source as it provides enhanced fault coverage for power and environmental problems.
• If you intend to use the SunMC agent as a telemetry source you must install either SunMC_3.6.1 agent with patch ID 123923-02_ or install SunMC 4.0  and the Sun Management Center 4.0 V5 Add-on software for SPARC Enterprise, Sun Fire, Sun Blade, Sun Ultra, and Netra systems. The T5440, T5240 and T5140 servers require that you install SunMC 4.0  and the Sun Management Center 4.0 V5 Add-on software for SPARC Enterprise, Sun Fire, Sun Blade, Sun Ultra, and Netra systems. Refer to the SunMC Documentation Center for more information.

NOTES:

1. Using ILOM as a Telemetry Source:

• If your system is running ILOM 1.0.x, it must be upgraded to ILOM 2.0.x or later to capture telemetry on the service processor.

• You must have the ILOM on the Service Processor networked to the SASM ASR plug-in. Please refer to your Server platform documentation for instructions on how to network your Service Processor.

2. Using ILOM 3.0.x as a Telemetry Source:

• ASR supports ILOM 3.0 on applicable systems.

3. Using Solaris 10 FMA as a Telemetry Source:

• Requires Solaris 10u3 or higher.
• If using Solaris 10u3 or 10u4, you must install the following patches:
  Patch IDs 127127-11 or higher kernel patch and associated required patches, 122752-04 or higher (obsoleted by 120011-14), 123839-07 or higher (obsoleted by 126897-02), 125369-10 or higher, and 137095-01 or higher.

4. Using Solaris 10 FMA as a Telemetry Source:

• Requires Solaris 10u6 or higher.

5. Using ILOM Fault Management as a Telemetry Source for Xxx7x Blade Servers:_

• ILOM Fault Management is the primary source of fault telemetry.
• Provides fault telemetry for Solaris, Linux, and Windows servers.

6.Using Solaris 10 FMA as a Telemetry Source for Xxx7x Blade Servers:

• Solaris 10 FMA provides some additional fault coverage, but ILOM Fault Management is the primary source of fault telemetry.

7. Using the Solaris operating system:

• Solaris operating system is NOT currently available for this blade.
• Solaris FMA will be available for this blade when the Solaris operating system is supported.

8. Using ILOM on this Blade Server:

• The ILOM on this blade product is NOT used for ASR. Power and environmental fault coverage is provided via the ILOM on the chassis (Sun Blade 6000 Modular System).